Yet another late blog post! This post was supposed to go up before Christmas in answer to two comments that I received about props that were made for the display. My apologies go out to Caroline and Wendy. Click on each picture for a better look.
I received this comment when I first published photos of the Hillside Shopping Centre Christmas window display -
"I too love images of cakes and pastries and jellies from the Edwardian era. When I saw the first image on another blog I thought it was from a book of that era! Did you use plaster to make the cakes? I do a gingerbread/candy display in my kitchen for Christmas and would love to make a faux cake. Thanks, Carolyn."
Carolyn, I hope that you are reading this blog post. I do apologize for not posting this earlier, sickness and the busy season delayed everything. Better late than never I suppose. Can you tell what blog that you saw this image on? I would love to see what they said.
I used paper pulp to create the summer window display cakes and pastries. It was labour intensive to create the moulded cakes and it also took a while for them to dry. It is very wet on the West Coast in the Autumn, Winter, and Spring so that was not an option. I would have taken far too long to produce them as well.
I decided to buy as many cake and jelly moulds I could find at the second hand stores to create the cakes. I washed the moulds in order to get rid of any grease that may be on them and then spray painted them with flat white spray paint. I mixed about seven different colours of artist acrylic paints and then began painting the tin moulds. Some colours, yellow and green in particular, needed several coats of paint in order to get an even rich colour.
Once the basic iced cakes were painted and dry I drizzled white or chocolate brown paint from a plastic squeeze bottle to hide paint edges as well as make them more interesting to look at.
This photo was taken for a blog post to show what the cakes would possibly look like when finished.
All of the cake stands were created using wooden pillar candle holders and wooden plates of various sizes and shapes. I didn't want to use glass cake stands in case anything fell over and broke. I also wanted specific colours to tie in with everything else.
The finished cakes in the window display. All of the flat surfaces on the cakes were covered with coloured gravel. I did this for several reasons, the first and most important was to hide the joins where I hot glued the metal moulds together. I also wanted to have a different texture on the cakes, it also gave quick added detail to the prop cakes.
I have a large group of candies that I made a couple of years ago for some items that I never did make but hope to in the future. I placed these around the cakes so that they appeared much more elaborate than they actually were.
These small cakes were made from 4" wide cardboard cylinders cut about 3" to 4" high. Cardboard was glued to the top of the cylinders. I collect cardboard tubes of all diameters and lengths for projects like this.
I mixed a modelling compound with the white acrylic paint and used a palette knife to apply the paint. Once the paint was dry I glued coloured glass glitter at the base of the cakes. Each cake is decorated with vintage milliners fruit on a base of green grass chenille.
Wendy Kolar Mullen sent me a message on Facebook -
I LOVE the Giant Peppermint Sticks!! What did you use to make those? Very clever...the display is Gorgeous...fantastic job...sure to delight many Holiday shoppers :0)
Here is how I created the giant candy sticks, cardboard cylinders and fused edge acetate florist ribbon. This method is quick and easy, no paint involved and the results are far superior as the edges are crisp and clean.
The base colour, your choice, is a 3" wide fused edge acetate florist ribbon wrapped around the cylinder. Most cylinders are spiral wrapped so follow the direction of the spiral and you won't have any bumps showing in the ribbon. Put a piece of tape on the end of the ribbon stuff the ribbon end inside the tube and firmly tape the it in place.
The second ribbon is a 1 1/2" ribbon that wraps around the cylinder overlapping the base ribbon edges, hiding them. Tape the ends and push them in the ends firmly taping them down.
From this point you can add one or two more ribbons. These ribbons can be 1/4" to 3/4" wide, wrapped around the cylinder. The ends are attached exactly the same as before.
Cap the ends with a piece of white card glued in place. Wrap the candy sticks with cellophane, tying each end with a narrow wired ribbon, leaving a tuft of cellophane at each end. That's all there is to making the candy sticks.
That beautiful fur covered chair in the window was the chair from the Spring window display. It was stripped of it's flowers and looks like this inside!
I love all the chartreuse greens!
Great How To on The Candy Sticks Len..Thank You..also loved reading about all your innovative work with the cake molds and stands..really cool!
Robert,I love chartreuse, it is such an interesting, bright, and happy colour.
Better late than never. Thank you for explaining your process. I think I'll try a cake mold next year for my kitchen at Chistmas.
Post a Comment